Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.



20,10 €
- +






White, non-yellowing with time


Tinted with 20 basic colors DUROCOLOR (in syringe packaging 20 ml) creating 120 indelible shades.

Fastness to washing

> 20,000 cycles (according DIN 53778)



Years drying

One hour (to the touch), depending on weather conditions


4-5 hours, depending on weather conditions

application temperature

From +8 ° C to +35 ° C



VOC (Volatile Organic Compounds): Limit the maximum content value VOC EU (Directive 2004/42 / CE) for this product (category A / a: "Internal matt walls and ceilings", Type WB): 30 gr / lt (2010). The ready to use product contains maximum 29 gr / lt VOC


Acrylic high-strength color fungicidal lasting. Prevents mold and bacterial growth and algae in places with intense humidity created condensation and in places with poor ventilation or in the absence of natural light, such as bathrooms, wc, kitchens, basements etc.

With outstanding resistance to frequent washing, superior hiding power and high performance, it is a timeless solution for sites that have or will develop mold.

Odorless and friendly to the user and the environment. Painted in any desired color through the dosing system DUROCOLOR of DUROSTICK.


The DUROSTICK BATH & KITCHEN act proactively and retrospectively in places such as bathrooms, kitchens, warehouses, basements, heated pools in the surrounding area, in poorly insulated ceilings etc.


1. Substrate preparation

The surfaces of concrete and marble plaster shall be dry, free from loose areas and have spent at least 30 days after their manufacture. For new concrete surfaces, make sure to remove any formwork oil with biodegradable oil cleaner BIOCLEAN (for industrial use). Then we spread 2 coats 1 mm, with corrosion inhibitor RUST FREE POWDER DUROSTICK of, any uncovered reinforcement points. Once dry, cover the points with repair mortar DUROFIX of DUROSTICK. Finally, prime with SOLVENT ASTARI diluted with THINNER 101 by DUROSTICK or white spirit.

For new surfaces from marble plaster, rub patocharto No. 60 and prime with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX or ASTARI SOLUBLE of DUROSTICK.

For previously painted surfaces stable, enough 2 coats with BATH & KITCHEN.

For filling, pulp or applying STUCOFIX STUCOFIX-P or POWDER COAT or GRANULAR by DUROSTICK or combination thereof, depending on the surface imperfections and how smooth finish is desired. Priming the masonry.

Prasinismenes or blackened surfaces and surfaces with mold, necessary first cleaned with DUROSTICK CLEANER D-95 and, after thoroughly rinsed and dried, primed with micromolar stabilizer AQUAFIX of DUROSTICK.

Peeled surfaces, less debris, primed with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX of DUROSTICK.

Strongly chalking surfaces of marble, sealed with quick setting plaster D-32, while concrete surfaces with repair mortar D-55 by DUROSTICK and then primed.

For filling joints around doors and window frames, we use internally paintable ACRYLIC PUTTY or outer elastomeric sealant DUROFLEX-PU or versatile sealant and adhesive DS-POLYMER 32 by DUROSTICK shades.

2. Application

To DUROSTICK BATH & KITCHEN is diluted with water at a ratio of 5-10%, depending on the substrate, stirring well. Apply with a brush, roller or airless spray in two coats. The second coat follows after the first completely dry.


1 kg / 6-8 m² per coat on properly prepared surfaces


The product does not require any hazard labeling under current European and national legislation. however recommended to keep away from children. If swallowed, seek medical advice immediately and show the container or label.