Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.


Romix Plastic Colour

3,00 €
- +






White non-yellowing with time


Tinted with 20 basic colors DUROCOLOR (in syringe packaging 20 ml) creating 120 indelible shades.

Fastness to washing

> 5000 cycles (in DIN 53778)



Years drying

One hour (to the touch), depending on weather conditions


4-5 hours, depending on weather conditions

application temperature

From +8 ° C to +35 ° C



VOC (Volatile Organic Compounds): Limit the maximum content value VOC EU (Directive 2004/42 / CE) for this product (category A / a "matt coatings for interior walls and ceilings", Type WB): 30 gr / lt (2010). The ready to use product contains maximum 21 gr / lt VOC ..


Plastic water color, generic, based on copolymer PVA-VEOVA.
It offers whiteness, coverage and breathability to the application surface.
The composition requires a minimal amount of pigment to create the desired shades. It is the most economical option for freshening up interiors.


1. Substrate preparation:

The marble surfaces must be dry, free from loose areas and have spent at least 30 days after their manufacture.
For new surfaces from marble plaster, rub patocharto No60 and prime with A 'YLI PLASTIC or 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX of DUROSTICK.
For filling, pulp or applying STUCOFIX STUCOFIX-P or POWDER COAT or GRANULAR by DUROSTICK or combination thereof, depending on the surface imperfections and how smooth finish is desired. Priming as before.
For previously painted surfaces stable, enough 2 coats with ROMIX PLASTIC COLOR of DUROSTICK.
Contaminated surfaces from soot and exhaust gases are cleaned with biodegradable cleaner VIOCLEAN (for nicotine and soot) or primed with METAL PRIMER of DUROSTICK.
Peeled surfaces, less debris, primed with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX of DUROSTICK.
Strongly chalking surfaces of marble, sealed with quick setting plaster D-32 and then primed.
To fill joints around casings, use internally paintable ACRYLIC PUTTY or DS-POLYMER 32 by DUROSTICK shades.

2. Application:

To ROMIX PLASTIC COLOR diluted with water at a ratio of up to 5%, depending on the substrate, stirring well. Apply with a brush, roller or airless spray in 3 layers.
Each coating follows after fully dry prior.


1 kg / 5-6 m² per coat on properly prepared surfaces