Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.


DUROXYL solvent preservative wood impregnation

7,00 €
- +



Forms - Color

impregnation lacquer liquid - 11 ready shades and 1 transparent

Solid weight

25 ± 1% w / w

solid volume

19 ± 1% w / v

Special weight

0,85 ± 0,04 kg / lt



application temperature

From +5 ° C to +35 ° C

drying time
3-4 hours (to touch), depending on weather conditions (humidity, temperature)


Lightweight is odorless when dry

VOC (Volatile Organic Compounds):
Limit maximum VOC content value EU (Directive 2004/42 / CE) for this product (category A / f: Interior / exterior woodstains without a film "Type D): 700 gr / lt (2010). The ready to use product contains maximum 675 gr / lt VOC ..
Marketing authorization number: TP8-0048


Ydatoapothitiko preservative impregnation for wood outdoors or indoors. effectively protects the wood from the wood-boring insects (woodworm), fungi, mold, blue stains and rotting.
Extremely resistant to strong sunlight, moisture and frost.
Applies easily and decorates the wooden surfaces with 11 natural colors in the color of the wood and a transparent, that highlights the natural beauty and highlights the grain tou.Anthektiko over time, it will not peel off, not inflated and not 'Pops' .


The DUROXYL applies to any kind of woodwork, interior and exterior surfaces where permanent protection is required, eg doors, windows, furniture, fences, pergolas, sheds, roofs beams, railings of balconies and terraces etc.


1. Surface preparation
Proper preparation ensures the finest result in both new and old wood.
New woods: Before applying DUROXYL, surfaces must be sanded with sandpaper suitable and have well-removed powder and resin if present, be removed by DUROSTICK THINNER 101.
Where necessary, should have been filled with wood putties DUROWOOD of DUROSTICK.
Old wood: Remove carefully with sandpaper loose materials and colors and coated with colorless or colored DUROXYL, depending on the type of wood and the shade desired.
If the wood infected with canker, it must be preceded by the use DUROWOOD KILLER.
Then filling with DUROWOOD and finally applying DUROXYL of DUROSTICK.
2. Application
After shaking well especially color DUROXYL polish, apply to low humidity surfaces a coating colorless DUROXYL which penetrates deeper into the wood, without any dilution, by brush or roller and then one to three coats color depending on the shade desired and the type of wood.

For even more protection from aging and adverse weather conditions, particularly the strong sunlight, on exterior surfaces, it recommends coating with one to two DUROLAC coatings (satin or gloss) or MARINER the DUROSTICK.


1lt / 8-10m² per layer, depending on the type and absorbency of the wood.