Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

DUROSTICK No37 - Waterproof liquid tile adhesive

3,72 €
- +

specifications

(Measurement conditions...

New

specifications

(Measurement conditions 23 ° C and 50% R.H.)

Form - Colour


Paste - White

Specific weight


1,55 ± 0,08 kg / lt

application temperature


From +5 ° C to +35 ° C
Temperature resistance from -30 ° C to +100 ° C for 2 hours

Open time for application according to EN 1346


≥30 minutes

Adjustability time


≥30 minutes

Slip according to EN 1308


<0,5 mm

Resistance seconded by EN 1348


> 2,0 N / mm2

Adhesion sheared after heat aged at +70 ° C in EN1324


> 1 N / mm²

Pointing on wall


After 12 hours

Pointing on floor


After 24 hours

Moisture-


Very good

Elasticity


high


APPLICATIONS

The DUROSTICK No37 is suitable for fixing ceramic tiles, artificial decorative bricks, insulation and soundproofing panels in concrete, plaster, plasterboard, cement, wood, solid oil paint, chipboard. Suitable for bonding ceramic tiles in damp areas such as bathrooms, wc and kitchen, even for bonding tiles have been removed and it is not possible to remove the old glue. Necessary for wafer bonding on wooden lofts and partitions, benches and kitchen walls (Figure 2). Used external walls and internal walls and floors (Fig.1). The priming low absorption tiles adhesively No37, as long as chosen category cementitious adhesive or C1 C1T, ensures unbreakable bonding, increasing the adhesion to the substrate. Adding to cementitious adhesives, in proportion 1kg per 25kg sack, increases the adhesive strength, elasticity and grip.


USE

It applies as a dry, stable, solid substrates, free of dust, loose materials, oil, grease and paint. Spread the adhesive evenly with a notched trowel 3-5mm and place the tiles within 20 minutes in order to avoid creating skin. If the plates and the substrate of low absorbency, coat both surfaces and place as the glue 'pull' for about 10 minutes.


REMARKS


• The surfaces are welded with No37 delivered for use after 3-7 days, depending on the humidity of the space.

• Necessary one of the two surfaces must be absorbent.

• Very porous surfaces such as aerated concrete and plasterboard should be primed with micromolar stabilizer AQUAFIX of DUROSTICK.


consumption

1-1,5 kg / m2, depending on the size of the trowel.