Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

D-80 HYDROSTOP

24,50 € 24,50 €
- +

SPECIFICATIONS

Colour


New

SPECIFICATIONS

Colour


White, non-yellowing with time

shades


Tinted with 20 basic colors DUROCOLOR (in syringe packaging 20 ml) creating 120 indelible shades. The PAL, DARK bases, TRANSPARENT, stained through the system COLOR COLLECTION in any desired shade.

Fastness to washing


> 22,000 cycles (according DIN 53778)

carbonation barrier (EN 1062-6)


Estimated equivalent air thickness value sd 200-250 m

Gloss


Mat

Years drying


One hour (to the touch), depending on weather conditions

recoating


4-5 hours, depending on weather conditions

application temperature


From +8 ° C to +35 ° C

flammable


No

VOC (Volatile Organic Compounds): Limit the maximum content value VOC EU (Directive 2004/42 / CE) for this product (category A / c "coatings for exterior walls of mineral substrate", Type WB): 75 gr / lt (2007), 40 gr / lt (2010) .The ready to use product contains maximum 39 gr / lt VOC ..

 


PROPERTIES

Elastomeric sealant and color together, suitable for use in external vertical surfaces - walls. Applied on new or previously painted surfaces, and covers capillary cracks and prevents their reappearance. Shields surfaces remaining tire (from -20 ° C to 80 ° C) and extremely resistant to sudden temperature changes, intense sunlight (fig. 1) constant humidity, snow and frost (Fig. 2) in urban , mountainous or coastal environment.

With high whiteness and high kalyptikoptita, offers timeless, perfect end finish coverings without requiring recoating with other acrylic paint.


APPLICATIONS

The D-80 HYDROSTOP elastic is ideal for any kind of new or old masonry plaster and concrete in regions with adverse weather conditions (air pollutants, buildings in coastal and mountainous areas).


USE


1. Substrate preparation

The surfaces of concrete and marble plaster shall be dry, free from loose particles and have spent at least 30 days after their manufacture. For new concrete surfaces, make sure to remove any formwork oil with biodegradable oil cleaner BIOCLEAN (for industrial use). Then we spread 2 coats 1mm, with corrosion inhibitor RUST FREE POWDER DUROSTICK of, any uncovered reinforcement points. Once dry, cover the points with repair mortar DUROFIX of DUROSTICK.Sti then prime with SOLVENT ASTARI diluted with THINNER 101 by DUROSTICK or white spirit at a ratio of 1: 1.

For new surfaces from marble plaster, rub patocharto No60 and prime with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX or ASTARI SOLUBLE of DUROSTICK.

For filling, pulp or applying STUCOFIX STUCOFIX-P or POWDER COAT or GRANULAR by DUROSTICK or combination thereof, depending on the relief of the surface and how smooth finish is desired. Priming the masonry.

For previously painted surfaces stable, enough with 2 coats D-80 HYDROSTOP elastic.

Contaminated surfaces from soot and exhaust gases are cleaned with biodegradable cleaner VIOCLEAN (for nicotine and soot) by DUROSTICK or primed with METAL PRIMER by DUROSTICK.

Peeled surfaces, less debris, primed with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX of DUROSTICK.

Strongly chalking surfaces of marble, sealed with quick setting plaster D-32, while concrete surfaces with repair mortar D-55 by DUROSTICK and then primed.

Ideally, surfaces with strong contractions, recommended that the water-repellent flexible plaster HYDROSTOP PLASTER ELASTIC or innovative, flexible, multi-purpose repair mortar MEGAFIX of DUROSTICK.

For filling joints around doors and window frames, we use internally paintable ACRYLIC PUTTY or outer elastomeric sealant DUROFLEX-PU or versatile sealant and adhesive DS-POLYMER 32 by DUROSTICK shades.

2. Application

To HYDROSTOP D-80 diluted with water in a ratio of 5-10%, depending on the substrate, stirring well. Apply with brush, roller or airless spray in two coats.

The second coat follows after the first completely dry.

 


CLEANING

The tools are cleaned with water and detergent solution immediately after use.


LIMITATION OF USE

Do not apply if there is a risk of rain or frost for the next 12 hours.


consumption

 
1kg / 6-8m² per coat, on previously prepared surfaces