Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

DUROSTICK cement paint - acrylic anti-mold & 100%

5,10 €
- +

New

specifications

Colour


Grey, white non-yellowing over

shades


Tinted with 20 basic colors DUROCOLOR (in syringe packaging 20 ml) creating 120 indelible shades.

Fastness to washing


> 20,000 cycles (according DIN 53778)

Gloss


Mat

Years drying


One hour (to the touch), depending on weather conditions

recoating


4-5 hours, depending on weather conditions

application temperature


From +8 ° C to +35 ° C

flammable


No

VOC (Volatile Organic Compounds):

Limit maximum VOC content value EU (Directive 2004/42 / CE) for this product (category A / c "Exterior walls of mineral substrate", Type WB): 75 gr / lt (2007), 40 gr / lt (2010). The ready to use product contains maximum 34 gr / lt VOC ..


PROPERTIES

Acrylic paint, high strength, with antifungal activity that lasts. It is harmless to humans and the environment. Prevents growth of mold microorganisms, psoriasis and algae on exterior surfaces of concrete and plaster. It is distinguished for its high performance and coverage and not saponified. Allows transpiration on the surface where it is applied, allowing water vapor to escape.

It has high resistance to alkalinity of surfaces.


APPLICATIONS


The DUROSTICK cement paint is ideal for long term protection of buildings exposed to moisture, snow and sea salt.


USE

1. Substrate preparation:

The surfaces of concrete and marble plaster shall be dry, free from loose areas and have spent at least 30 days after their manufacture. For new concrete surfaces, make sure to remove any formwork oil with biodegradable oil cleaner BIOCLEAN (for industrial use). Then we spread 2 coats 1mm, with corrosion inhibitor RUST FREE POWDER DUROSTICK of, any uncovered reinforcement points. Once dry, cover the points with repair mortar DUROFIX of DUROSTICK. Then prime with SOLVENT ASTARI diluted with THINNER 101 by DUROSTICK or white spirit. For new surfaces from marble plaster, rub patocharto No. 60 and prime with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX or ASTARI SOLUBLE of DUROSTICK.

Prasinismenes or blackened surfaces and surfaces with mold, necessary first cleaned with DUROSTICK CLEANER D-95 and after thoroughly rinsed and dried, primed with SOLVENT ASTARI or micromolar stabilizer AQUAFIX of DUROSTICK.

For filling, pulp or applying STUCOFIX STUCOFIX-P or POWDER COAT or GRANULAR by DUROSTICK or combination thereof, depending on the surface imperfections and how smooth finish is desired. Priming the masonry. For previously painted surfaces stable, enough 2 coats with DUROSTICK cement paint.

Contaminated surfaces from soot and exhaust gases are cleaned with biodegradable cleaner VIOCLEAN (for nicotine and soot) by DUROSTICK or primed with METAL PRIMER by DUROSTICK.

Peeled surfaces, less debris, primed with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX of DUROSTICK.

Strongly chalking surfaces of marble, sealed with quick setting plaster D-32, while concrete surfaces with repair mortar D-55 by DUROSTICK and then primed.

Ideally, surfaces with strong contractions, recommended that the water-repellent flexible plaster HYDROSTOP PLASTER ELASTIC or innovative, flexible, multi-purpose repair mortar MEGAFIX of DUROSTICK.

For filling joints around doors and window frames, we use internally paintable ACRYLIC PUTTY or outer elastomeric sealant DUROFLEX-PU or versatile sealant and adhesive DS-POLYMER 32 by DUROSTICK shades.

2. Application:

To DUROSTICK cement paint is diluted with water at a ratio of 5-10%, depending on the substrate, stirring well. Apply with a brush, roller or airless spray in two coats. The second coat follows after the first completely dry.


consumption

1kg / 6-8m² per coat, on previously prepared surfaces