Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

ROMIX ACRYLIC 100% - For concrete and plaster

12,80 €
- +

Colour


White, non-yellowing with...

New

Colour


White, non-yellowing with time

shades


Tinted with 20 basic colors DUROCOLOR (in syringe packaging 20 ml) creating 120 indelible shades. The PAL, DARK colored bases through COLOR COLLECTION system in any desired shade.

Fastness to washing


> 10,000 cycles (according DIN 53778)

Gloss


Mat

Years drying


One hour (to the touch), depending on weather conditions

recoating


4-5 hours, depending on weather conditions

application temperature


From +8 ° C to +35 ° C

flammable


No

VOC (Volatile Organic Compounds):
Limit maximum VOC content value EU (Directive 2004/42 / CE) for this product (category A / c "Exterior walls of mineral substrate", Type WB): 40 gr / lt (2010). The ready to use product contains maximum 39 gr / lt VOC

 
PROPERTIES

Acrylic high opacity and whiteness color with excellent adhesion and performance. Recommended for areas requiring frequent repainting and refreshing both for internal and for external use. Easy to work with, it dries quickly and resists to atmospheric pollutants. It offers cost-effective solution for professionals who undertake places where frequent maintenance is required.

The ROMIX ACRYLIC 100% allows transpiration at the surfaces where it is applied, allowing water vapor to escape.


APPLICATIONS

To ROMIX ACRYLIC 100% is suitable for new or epanavafomenes plaster and concrete or for first cover coats when we change hue.

Also ideal for freshening up in places that need frequent maintenance, such as schools, public buildings, hotels and areas exposed to possible indications slogans, graffiti etc.


USE

1. Substrate preparation:

The surfaces of concrete and marble plaster shall be dry, free from loose areas and have spent at least 30 days after their manufacture. For new concrete surfaces, make sure to remove any formwork oil with biodegradable oil cleaner BIOCLEAN (for industrial use). Then we spread 2 coats 1mm, with corrosion inhibitor RUST FREE POWDER DUROSTICK of, any uncovered reinforcement points. Once dry, cover the points with repair mortar DUROFIX of DUROSTICK. Finally, prime with SOLVENT ASTARI diluted with THINNER 101 by DUROSTICK or white spirit at a ratio of 1: 1.

For new surfaces from marble plaster, rub patocharto No. 60 and prime with 100% ACRYLIC PRIMER or micromolar stabilizer AQUAFIX or ASTARI SOLUBLE of DUROSTICK.

For filling, pulp or applying STUCOFIX STUCOFIX-P or POWDER COAT or GRANULAR by DUROSTICK or combination thereof, depending on the surface imperfections and how smooth finish is desired. Priming the masonry.

For previously painted surfaces stable, enough 2 coats with ROMIX ACRYLIC 100%.

Contaminated surfaces from soot and exhaust gases are cleaned with biodegradable cleaner VIOCLEAN (for nicotine and soot) by DUROSTICK or primed with METAL PRIMER by DUROSTICK.

Peeled surfaces, less debris, primed with 100% ACRYLIC PRIMER or ASTARI Solvent or micromolar stabilizer AQUAFIX of DUROSTICK.

Strongly chalking surfaces of marble, sealed with quick setting plaster D-32, while concrete surfaces with repair mortar D-55 by DUROSTICK and then primed.

For filling joints around doors and window frames, we use internally paintable ACRYLIC PUTTY or outer elastomeric sealant DUROFLEX-PU or versatile sealant and adhesive DS-POLYMER 32 by DUROSTICK shades.

2. Application:

To ROMIX ACRYLIC 100% is diluted with water in a ratio of up to 5%, depending on the substrate, stirring well. Apply with a brush or roller or airless spray in 2-3 layers. Each coating follows after fully dry prior.


consumption


1 kg / 6-7 m² per coat on properly prepared surfaces