Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

DUROSTICK ACRYLIC EMULSION - improver additive for tile adhesives and grouts

4,30 €
- +

specifications

Form - Colour


New

specifications

Form - Colour


Milk - White, becomes transparent when dry

Specific weight


1,02 ± 0,04 kg / lt

application temperature


From +5 ° C to +35 ° C

Environmentally friendly, contains no solvents

PROPERTIES

Admixture styrene-butadiene based emulsion, which added to a cementitious adhesives and grouts tiles and marble, improves their properties.

It proposed mainly to increase the elasticity, adhesion, tightness and resistance to abrasion.


APPLICATIONS

For plate welds, the addition of acrylic emulsion in tile adhesives are required for applications in open outdoors subjected to contraction and underfloor heating or non-absorbent substrates.

Ideal for tiles exposed permanently investments in water, such as swimming pools, swimming pools, fountains, car washes, etc.

The addition of acrylic polymers, depending on their level of participation in tile adhesives (Fig.1), improves their technical characteristics, to meet the requirements of S1 and S2 groups (elastic adhesive) according to EN 12002.

In joint fillers, the addition of the acrylic emulsion imparts increased flexibility, high adhesion to the webs of the plates, increasing the tightness and resistance to acidic cleaners, and in chlorinated seawater.

Necessary on substrates subject to contraction and vibration, such as lofts with a wooden substrate.

It recommended as a primer for absorbent substrates and aerated concrete and cement mortar on friable stabilization floors.

Also helping to keep dark shades of grout.