Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.



29,00 €
- +



Form - Colour

Thixotropic liquid - White, gray

Specific weight

1,58 ± 0,08 kg / lt

application temperature

From +10 ° C to +35 ° C


Up to 10-15% with THINNER 101 or white spirit

drying time

One hour (to the touch), depending on weather conditions


After 10-15 hours, depending on weather conditions

VOC (Volatile Organic Compounds): Limit the maximum content value VOC EU (Directive 2004/42 / CE) for this product (category A / i "pack performance coatings", Type D): 500 g / l (2010). The ready to use product contains maximum 450 g / l VOC


Metal Primer, alkyd-based, with strong anti-corrosion additives to ensure long-term protection against corrosion.

Workability soft, strong adhesion, high hiding, spreads perfectly and dries quickly.


As corrosion protection, protects properly prepared metal surfaces such as railings (Fig. 2) doors and all kinds of metal structure.

Walls and ceilings that have been impregnated by nicotine and soot or show blackness of moisture as well as ceilings glue or lime, a coating METAL PRIMER DUROSTICK isolate the infected surfaces and creates the appropriate substrate for final painting.


Surface preparation - Implementation

Old painted metal surfaces: thoroughly Remove loose paint and rust using a metal spatula, sandpaper, wheel or coarse steel wool. Clean with DUROSTICK THINNER 101 and apply two coats of METAL PRIMER DUROSTICK with brush, roller or spray. If required smooth surface, rub and remove dust.

Finally, apply one to two coats enamel DUROLUX or DUROLUX AQUA by DUROSTICK by roller or brush (fig. 1).

Metal new surfaces:
Grate and clean surfaces until removed rust and oils with the same procedure.

Apply by roller a layer white METAL PRIMER to dry surface and then two layers of plastic or acrylic DUROSTICK color.


1kg / 8-14m² per coat, on previously prepared surfaces.