Our webstore uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

close

DUROSTICK D-6 - fiber reinforced cement mortar for thicknesses 2-5cm / layer

9,65 €
- +

DUROSTICK D-6 25kg

New

Ready, fiber reinforced, leveling mortar that just by adding water and stretches easily worked (Fig.1).

Has excellent rheological properties that make it necessary for casting purposes and spirit level (Figure 2), for any kind of investment in flooring.

Does not corrode pipes (like traditional materials with sea sand), no crack, have high mechanical strength and is resistant to frost and humidity.


Classified as CT-C20-F4-AR4-A1fl according to EN 13813 (CERECO Code: 137A / 2009).


specifications

(Measurement conditions 23 ° C and 50% R.H.)

Form - Colour


Fiber-reinforced cementitious powder - Grey

Toxic / flammable (according to EN 88/379)


No

Bulk density of dry mortar


1,45 ± 0,05 kg / lt

Bulk density of fresh mortar


1,90 ± 0,05 kg / lt

Maximum grain diameter


5 mm

Water demand


4,5 lt water to 25 kg of cement

application temperature


From +5 ° C to +35 ° C
Temperature resistance from -20 ° C to +80 ° C
Pot life At least 2 hours

Foot traffic


After 12 hours

tiling


After 4-6 days

MECHANICAL PROPERTIES

Resistance 28 days in accordance with EN 13892-2:

• bending


5,00 ± 0,50 N / mm²

Compressive strength according to EN 13892-2 in:

• 24 hours


4,50 ± 1,50 N / mm²

• 7 days


15,00 ± 1,00 N / mm²

• 28 days


22,00 ± 1,00 N / mm²

• Resistance 28 days in traction during EN13892-8:


≥ 0,80N / mm²
• Abrasion resistance BCAkata EN 13892-4: 400 ± 80mm

 

Experimental measurements were performed according to EN 13813 sto Existing laboratory DUROSTICK and confirmed by checking CERECO (137A / 2009 code).
NB .: The addition of 1,4 kg / sack DUROSTICKDS-76 plasticizer and accelerator helps increase the rheology of the cement and to accelerate hardening. The pumping of cement from long distance is facilitated with the result that "boukonoun" transfer tubes.


APPLICATIONS

The DUROSTICK D-6 are ideal as a substrate before laying tiles, marble, parquet, trowelled screed indoors or outdoors. It is the ideal solution because of its high industrial quality and are absolutely necessary when finding good quality aggregates (washed sea sand or river appropriate particle size) is difficult.


SURFACE PREPARATION

1. Surface preparation
The substrates must be clean, free of loose materials, dust, oils and wetted before application.

2. Application:

Pour the cement into 4,5-5lt clean water and mix with a low speed drill or mixer.

The laying of the material is such that the concrete.

For heating, the addition ACRYLIC EMULSION or D-20 by DUROSTICK in mixing water at a ratio of 1: 1, increases the flexibility of D-6 of DUROSTICK, which is necessary for this application.